2022_en.docx 3 / 9 5.3 Wages and benefits ‘Wages and benefits’ refers in our organisation to the national and international laws relating to basic and minimum wages/salaries and all entitlements in excess [...] receive and impart information and ideas without interference by public authorities and regardless of national frontiers. The freedom of the media and its plurality are respected. Our standards and values [...] servitude and forced or compulsory labour, and trafficking in human beings) 10.1.5 Freedom of association and collective bargaining 10.1.6 Harassment and non-discrimination 10.2 Occupational health and safety

Dateityp: application/pdf
Verlinkt bei:

lantern and without coupling Output in solid shaft (build types 1L, 3L and 13L) and hollow shaft design 1LSV and 3 LSV with motor lantern and coupling Type series L (solid shaft) Shown in ratio 8:1 and in a [...] on the attachment sides 1 and 3 and processed sides 4 and 5 with at- tachment threads. The mounting of the shafts by tapered roller bearings in a cantilevered support (drive) and fork mounting (out- put) [...] (EN 292) and EMC directives to the ex- tent they are applicable. 4.2 Type designations DynaGear D37 to D190 Output in solid shaft (build types 1L, 3L and 13L) and hollow shaft design 1LSV and 3LSV without

Dateityp: application/pdf
Verlinkt bei:

Lubrication of guiding carriages1, 2, 3 and 4 (F). Guiding carriages 1 and 3 must be lubricated individually through both funnel grease nipples on side C, guiding carriages 2 and 4 through both funnel grease nipples [...] n of guiding carriages 1, 2, 3 and 4 (F). Guiding carriages 1 and 3 must be lubricated individually through both funnel grease nipples on side C, guiding carriages 2 and 4 through both funnel grease nipples [...] 2024 1 Beta 40-SSS Lubrication of spindle drive (S). Lubrication of guiding carriages 1 and 2 (F). The spindle drive and guiding carriages must be lubricated through all three funnel grease nipples on either

Dateityp: application/pdf
Verlinkt bei:

breathing ,cough, chills and fever ("polymer fume fever"), tachycardia ADVERSE EFFECTS AND MAIN RISKS The product is an inert preparation and no risk is expected for the human health and the environment in its [...] CLEANING / ABSORPTION PROCEDURES: Sweep and scoop out the released material. Dispose of in accordance with local laws and regulations. 7TH SECTION - HANDLING AND STORAGE HANDLING: Av'oid processing above [...] It does not irritate skin and is physiologically inert. Avoid ingestion of products of aecomposition vapours. ADVERSE EFFECT : Delayed and/or immediate effects after short and/or prolonged exposure. Irritation:

Dateityp: application/pdf
Verlinkt bei:

of guiding carriages 1 and 2 (F). The guiding carriages must be lubricated through both funnel grease nipples on either side. F(1) F(2) Lubrication of guiding carriages 1 and 2 (F). The guiding carriages [...] Lubrication of guiding carriages 1 and 2 (F). The guiding carriages must be lubricated through both funnel grease nipples on either side. Lubrication of guiding carriages 1 and 2 (F). The guiding carriages must [...] carriages 1 and 2 (F). The guiding carriages must be lubricated through both funnel grease nipples on either side. F(1) F(2) F(1) F(2) F(1+2) F(3+4) Lubrication of guiding carriages 1+2 and 3+4 (F). The

Dateityp: application/pdf
Verlinkt bei:

2012/19/EU (article 2, paragraph 3 and 4). Our suppliers commit to adhere to substance prohibitions and declaration obligations as per RoHS. Transparency, partnership, and open communication form the basis [...] manufacturing linear units, linear tables, and systems for your production. We therefore do not manufacture substances as defined in article 3, paragraph 1 and paragraph 8 of the REACH regulation. Our products [...] Nevertheless, do we meet our responsibilities in enquiring about our supply chain and communicating it with our suppliers and customers. Naturally, we ensure a smooth production process in compliance with

Dateityp: application/pdf
Verlinkt bei:

assembly and commissioning. For information about the installed variant, please see your order confirmation. The HSB assembly and maintenance instructions must also be observed. Assembly and alignment [...] pushed onto the brake rod and the rod is fitted in the two holders. 1. Align the clamped brake rod holder (5) in the centre of the screw-on threads and parallel to the profile tube and tighten (observe tightening [...] as follows: The profile moves The lower brake rod is clamped and secured with slotted nuts The carriage moves The top brake rod is clamped and secured with slotted nuts K e y 1 Upper rod holder (floating

Dateityp: application/pdf
Verlinkt bei:

1, 2, 3 and 4 (F). Guiding carriages 1 and 3 must be lubricated individually through all four funnel grease nipples on side C (two funnel grease nipples per carriage), guiding carriages 2 and 4 through [...] carriages 1+2 and 3+4 (F). The guiding carriages must be lubricated through both funnel grease nipples on either side. F(1+2) F(3+4) Gamma 90-ZSSD F(1) F(3) Lubrication of guiding carriages 1, 2, 3 and 4 (F). [...] Guiding carriages 1 and 3 must be lubricated individually through both funnel grease nipples on side C, guiding carriages 2 and 4 through both funnel grease nipples on side D. Gamma 120-ZSSD, SP250 Gamma

Dateityp: application/pdf
Verlinkt bei:

reduced wear and good pressure absorption capacity – Reduced maintenance due to – good sealing effect and resistance to water and other media – long relubrication intervals and good ageing and oxidation stability [...] greases for e.g. rolling and plain bearings, pivoting bearings, small gears. They can also be used as sealing and lubricating greases for labyrinth seals and industrial valves and fittings. These greases [...] mineral oil and special calcium soap. They offer high resistance to mechano-dynamical loads and good adhesion properties. Klüberplex BE 31-102…-222…-502 are highly resistant to media, water and water vapour

Dateityp: application/pdf
Verlinkt bei:

system) and a drive element (screw or timing belt drive). Depending on its design, the carriage is able to absorb forces and moments in all directions, and is positively connected to the guidance and drive [...] m/s), and for any cleaning work the linear unit drive must be shut down and secured against being restarted. • All installed ball bearings are sealed and maintenance-free. • Remove excessive dust and dirt [...] art The unit conforms to the current state of the art and applicable rules and regulations. The device complies with the EC Machinery Directive and the relevant Harmonised Standards (European standards)

Dateityp: application/pdf
Verlinkt bei: