stroke: Carriage 500 mm: Gears D75 / D90: Max. total length: Forces and moments (longer on request) with rack-and-pinion drive (helical) and double linear guide (AZSH) AZSH-D75 AZSH-D90 Forces Dynamic [N] [...] 5.00 m/s (D75) / 4.50 m/s (D90) Max. acceleration: 20 m/s² Repeat accuracy: ± 0.05 mm 5.80 Nm Rack and pinion: Module 2 helical Drive pinion: Module 2, 30 teeth Stroke per revolution: 200 mm DynaGear D75

Dateityp: application/pdf
Verlinkt bei:

/ D115: 10.35 / 16.70 kg Max. total length: 8020 mm Forces and moments (longer on request) with rack-and-pinion drive module 2 (helical) and double linear guide (AZSH) AZSH-D90 AZSH-D115 Forces Dynamic [...] 50 m/s (D90) / 4.00 m/s (D115) Max. acceleration: 20 m/s² Repeat accuracy: ± 0.05 mm 7.20 Nm Rack and pinion: Module 2 helical Drive pinion: Module 2, 30 teeth Stroke per revolution: 200 mm DynaGear D90

Dateityp: application/pdf
Verlinkt bei:

/ D115: 10.35 / 16.65 kg Max. total length: 8020 mm Forces and moments (longer on request) with rack-and-pinion drive module 3 (helical) and double linear guide (AZSH) AZSH-D90 AZSH-D115 Forces Dynamic [...] 50 m/s (D90) / 4.00 m/s (D115) Max. acceleration: 20 m/s² Repeat accuracy: ± 0.05 mm 7.20 Nm Rack and pinion: Module 3 helical Drive pinion: Module 3, 20 teeth Stroke per revolution: 200 mm DynaGear D90

Dateityp: application/pdf
Verlinkt bei:

16552 20 13 6 M8 10 16499 20 13 6 M6 RM4 15371 13 8 6 M5 C and D 11 18784 12 10 3,5 M4 Alpha 20-B-225 E 15 19211 25 18 8 M8 RM6 15372 18 10 8 M6 C and D 11 18784 12 10 3,5 M4 Alpha 30-B-325 E 6 10561 25 18 [...] 16772 25 17 9,5 M10 RM6 15372 18 10 8 M6 C and D 11 18784 12 10 3,5 M4 Alpha 35-B-455 E 6 10561 25 18 8 M10 24 16772 25 17 9,5 M10 RM6 15372 18 10 8 M6 C and D 3 10558 20 12 5 M6 * For further information [...] lz [mm4] Y Z NS 3 / 4 / 6 / 11 RM 4 / 6 NS 4.1 / 10 Release: 05.12.2024Page A5 Profile dimensions and sliding blocks (NS) Stop angle standard page C Linear unit Page * NS ID No. l b h g [mm] [mm] [mm]

Dateityp: application/pdf
Verlinkt bei:

crucial for the service life of the entire mechanical linear drive (forces and moments, taking into consideration directions and possible combinations, lead to a moderate load (Fm ); ambient conditions, [...] Service Life of Roller, Rail Guide and Ball Screw Fm = (F13 ● q1 / 100 + F23 ● q2 /100 + Fn3 ● qn /100)1/3 1. Moderate load of the guide or ball screw L = (C / F)3 ● 105 ● R 2. Nominal service life of [...] Nominal service life of guide [m] C : Dynamic load rating of guide (Cdyn) [N] (see Table on pages TL11 and TL12) R : Factor for roller guide size Beta 50 ... Beta 80 + Sigma 70: R = 0,625; Beta 80-C + Sigma

Dateityp: application/pdf
Verlinkt bei:

shaft short, mounting side D AZ6 = Drive shaft long, mounting side C and D AZX = Integrated drive shaft (standard, not Delta 110-C and 145-C) Further arrangements for drive shaft, see page Z1 EO2 / EO10 [...] Roller guide Model S = Standard ; A = Alternative (profile unmachined) Drive specifications Width and type of toothed belt Stroke per revolution Stroke Total length Cover AK = Cover band Accessories AZ1 [...] Special (add specification description) Further accessories (separate position) MGK = Motor mounting and coupling (according to dimension sheet) URT = Deflection belt drive (according to dimension sheet)

Dateityp: application/pdf
Verlinkt bei:

Gears D90 / D115: 10.35 / 16.65 kg Max. total length: 8030 mm Forces and moments (longer on request) with rack-and-pinion drive (helical) and double linear guide (AZSS) AZSS-D90 AZSS-D115 Forces Dynamic [N] [...] 50 m/s (D90) / 4.00 m/s (D115) Max. acceleration: 20 m/s² Repeat accuracy: ± 0.05 mm 8.60 Nm Rack and pinion: Module 3 helical Drive pinion: Module 3, 20 teeth Stroke per revolution: 200 mm Servo-high

Dateityp: application/pdf
Verlinkt bei:

abelle) • Wenn nötig Riemenspannung ändern und Messung wiederholen • Adjust the specified distance A • Strike the belt sharply at about the middle of the length and detect the frequency (see table) with [...] with a belt measuring device • If necessary change belt tension and repeat the measurement

Dateityp: application/pdf
Verlinkt bei:

abelle) • Wenn nötig Riemenspannung ändern und Messung wiederholen • Adjust the specified distance A • Strike the belt sharply at about the middle of the length and detect the frequency (see table) with [...] with a belt measuring device • If necessary change belt tension and repeat the measurement

Dateityp: application/pdf
Verlinkt bei:

Tabelle) • Wenn nötig Riemenspannung ändern und Messung wiederholen • Adjust the specified distance A • Strike the belt sharply at about the middle of the length and detect the frequency (see table) with [...] with a belt measuring device • If necessary change belt tension and repeat the measurement Abstand / distance A

Dateityp: application/pdf
Verlinkt bei: