HSB-Beta® Type Right-Left Technical data (e.g. forces and moments, lubrication etc.) and other information can be found in the respective assembly and maintenance manual for the linear units of the same

Dateityp: application/pdf
Verlinkt bei:

Lubrication of spindle drive (S). Lubrication of guiding carriages 1 through 4 (F). The spindle drive and guiding carriages must be lubricated through both funnel grease nipples on either side. F(1-4)S Lubrication [...] Lubrication of spindle drive (S). Lubrication of guiding carriages 1 through 4 (F). The spindle drive and guiding carriages must be lubricated through both funnel grease nipples on either side. F(1-4)S Lubrication [...] Lubrication of spindle drive (S). Lubrication of guiding carriages 1 through 4 (F). The spindle drive and guiding carriages must be lubricated through both funnel grease nipples on either side. F(1-4)S Lubrication

Dateityp: application/pdf
Verlinkt bei:

Rack and pinion: Module 2 helical Drive pinion: Module 2, 18 teeth Stroke per revolution: 120 mm Servo-high-performance-gear: DynaGear D55 Ratios: 5 / 10 / 15 Idle torque at drive pinion: Forces and Moments [...] Moments (longer on request) with rack-and-pinion drive (helical) and double linear guide (AZSS) AZSS-D55 Forces Dynamic [N] 1300-1800 ** 3000 3000 Moments Dynamic [Nm] 600 1800 1800 FX FY FZ MX MY MZ D55

Dateityp: application/pdf
Verlinkt bei:

mm stroke: Carriage 320 mm: Gear D55: Max. total length: Forces and Moments (longer on request) with rack-and-pinion drive (helical) and double linear guide (AZSH) AZSH-D55 Forces Dynamic [N] 1300-1800 [...] m/s Max. acceleration: 20 m/s² Repeat accuracy: ± 0.05 mm Idle torque at drive pinion: 2.5 Nm Rack and pinion: Modul 2 helical Drive pinion: Modul 2, 18 teeth Stroke per pinion revolution: 120 mm Servo

Dateityp: application/pdf
Verlinkt bei:

mm stroke: Carriage 400 mm: Gear D75: Max. total length: Forces and moments (longer on request) with rack-and-pinion drive (helical) and double linear guide (AZSH) AZSH-D75 Forces Dynamic [N] 1500-2200 [...] m/s Max. acceleration: 20 m/s² Repeat accuracy: ± 0.05 mm Idle torque at drive pinion: 4.80 Nm Rack and pinion: Module 2 helical Drive pinion: Module 2, 30 teeth Stroke per pinion revolution: 200 mm Ser

Dateityp: application/pdf
Verlinkt bei:

pinion: 4.80 Nm Rack and pinion: Module 2 helical Drive pinion: Module 2, 30 teeth Stroke per pinion revolution: 200 mm Servo-high-performance-gear: DynaGear D75 Ratios: 5 / 10 / 15 Forces and moments (longer [...] (longer on request) with rack-and-pinion drive (helical) and double linear guide (AZSS) AZSS-D75 Forces Dynamic [N] 1500-2200 ** 8000 8000 Moments Dynamic [Nm] 1500 4000 4000 FX FY FZ MX MY MZ Variants for gear

Dateityp: application/pdf
Verlinkt bei:

prevention and protection – Part 1: Basic concepts and methodology 2019 EN ISO 80079-36 Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements [...] Model series: Beta, Delta comply with the provisions of Directive 2014/34/EU (ATEX) for equipment and protective systems intended for use in potentially explosive atmospheres. The manufacturer is solely

Dateityp: application/pdf
Verlinkt bei:

prevention and protection – Part 1: Basic concepts and methodology 2011 EN ISO 80079-36 Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements [...] Model series: Beta, Delta comply with the provisions of Directive 2014/34/EU (ATEX) for equipment and protective systems intended for use in potentially explosive atmospheres. The manufacturer is solely

Dateityp: application/pdf
Verlinkt bei:

80 Nm Rack and pinion: Module 2 helical Drive pinion: Module 2, 30 teeth Stroke per pinion revolution: 200 mm Servo-high-performance-gear: DynaGear D75 / D 90 Ratios: 5 / 10 / 15 Forces and moments (longer [...] (longer on request) with rack-and-pinion drive (helical) and double linear guide (AZSS) AZSS-D75 AZSS-D90 Forces Dynamic [N] 1500-2200 ** 3000-4000 ** 12000 12000 Moments Dynamic [Nm] 2500 7000 7000 FX FY

Dateityp: application/pdf
Verlinkt bei:

Gears D75 / D90: 6.30 / 10.50 kg Max. total length: 8000 mm Forces and moments (longer on request) with rack-and-pinion drive (helical) and double linear guide (AZSH) AZSH-D75 AZSH-D90 Forces Dynamic [N] [...] (D90) Max. acceleration: 20 m/s² Repeat accuracy: ± 0.05 mm Idle torque at drive pinion: 5.80 Nm Rack and pinion: Module 2 helical Drive pinion: Module 2, 30 teeth Stroke per pinion revolution: 200 mm Ser

Dateityp: application/pdf
Verlinkt bei: