vertical application [N] µ : Friction coefficient for linear guide µ = 0.006 Friction coefficient for roller guide µ = 0.002 Friction coefficient for sliding guide µ = 0.1 g : Gravitational acceleration [...] Drive Dimensions for Mechanical Linear Drives MA = Mload + Midle Required drive torque* MA [Nm]: Definitions: MA : Required drive torque [Nm] M load : Load torque [Nm] M idle : See data sheets [Nm] FX

Dateityp: application/pdf
Verlinkt bei:

Standard rail guide for all linear units/tables is "Rexroth" version Vsp = Pretension (in % of dynamic load rating) C50 = Dynamic load rating for 50 km service life CDIN = Dynamic load rating for 100 km service [...] Standard rail guide for all linear units/tables is "Rexroth" version Vsp = Pretension (in % of dynamic load rating) C50 = Dynamic load rating for 50 km service life CDIN = Dynamic load rating for 100 km service [...] Load ratings for rail guides (SF) per guiding carriage Guide size Description Vsp C50 CDIN Description Vsp CDIN [] [] [N] [N] [N] [] [N] [N] 15-B 15 SHS15V 564 14200 11271 R1622-123-20 620 9860 20-B 20

Dateityp: application/pdf
Verlinkt bei:

Instructions for Brakes/Crash protection En-GB_Montageanleitung_Bremse-Absturzsicherung.Docx 1 / 2 K / ao / 27/02/2024 changed: ao / 27/02/2024 The manufacturer's operating instructions for the installed [...] installed brake/crash protection system must generally be observed for assembly and commissioning. For information about the installed variant, please see your order confirmation. The HSB assembly and maintenance [...] lower rod (clamped) 3 Holder for brake/crash protection Figure: 2-axle system, Beta 80-ZSS and Beta 60-SSS (profile moves) with attached Mayr brake Assembly Instructions for Brakes/Crash protection En-

Dateityp: application/pdf
Verlinkt bei:

ey Extension by 2SA mm for every 60 mm for for for for for for for for de ep :6deep 12 d ee p Special design: Spindle support with damping ring (extension of total length: 10 mm for every 2 SA) Design with [...] length = Stroke Stroke Extension by 2SA mm for every 50 mm for for for for for for for for de ep deepw ith fe at he r k ey deep de ep only one lubricating hole for SRS 2 SA 8 SA6 SA0 SA 4 SA a) Data in brackets [...] of total length: 10 mm for every 2 SA) Spindle support (SA) Total length [mm] Total length = Stroke Stroke Extension by 2SA mm for every 80 mm for for for for for for for for w ith fe at he r k ey deepdeep

Dateityp: application/pdf
Verlinkt bei:

Adjustment Instructions EA­NHT Holder for proximity switch: NHT þ with depth stop þ holders already mounted: pre­adjusted and ready for use Adjustment Instructions Holder for proximity switch: NHT Clamp hol [...] s. Following are some tips for troubleshooting. If you cannot rectify the error yourself, please contact SITEMA. We will be glad to help. Adjustment Instructions Holder for proximity switch: NHT Clamp [...] amps the rod or load. For further information see the clamping head instructions. Proximity switch 2: ► Check whether the clamping is released and the rod is freely movable. For further information se

Dateityp: application/pdf
Verlinkt bei:

Replaced by: ROTEX® GS is a plug-in shaft coupling for measuring technology and automatic control engineering. It is able to compensate for shaft misalignment, for example caused by manufacturing inaccuracies [...] roofed place for 6 - 9 months. The coupling hubs made of aluminium can be stored at a dry and roofed place for several years. The features of the coupling spiders (elastomers) remain unchanged for up to 5 years [...] evenly. The displacement figures specified in tables 14 and 15 provide for sufficient safety to compensate for external influences like, for example, thermal expansion or foundation settling. ! In order to ensure

Dateityp: application/pdf
Verlinkt bei:

Registration No.136871 NSF has processed the application for Registration of Klübersynth UH1 64-62 to the NSF International Registration Guidelines for Proprietary Substances and Nonfood Compounds (2017), [...] Program June 18, 2018 This product is acceptable as a lubricant with incidental food contact (H1) for use in and around food processing areas. Such compounds may be used on food processing equipment as [...] protective anti-rust film, as a release agent on gaskets or seals of tank closures, and as a lubricant for machine parts and equipment in locations in which there is a potential exposure of the lubricated part

Dateityp: application/pdf
Verlinkt bei:

Registration No.136871 NSF has processed the application for Registration of Klübersynth UH1 64-62 to the NSF International Registration Guidelines for Proprietary Substances and Nonfood Compounds (2017), [...] Program June 18, 2018 This product is acceptable as a lubricant with incidental food contact (H1) for use in and around food processing areas. Such compounds may be used on food processing equipment as [...] protective anti-rust film, as a release agent on gaskets or seals of tank closures, and as a lubricant for machine parts and equipment in locations in which there is a potential exposure of the lubricated part

Dateityp: application/pdf
Verlinkt bei:

standard EN 61000-6-1. Any other use, or use for purposes beyond those stipulated, will be classed as illegitimate. The manufacturers accept no liability for any loss thereby incurred. The risk is borne [...] operation, refer to the following documents: • This operating manual for the linear unit, particularly the technical data • The operating manual for the line into which it is installed Decommissioning Dispose of [...] relubricated with a grease suitable for use in clean rooms (basic lubrication carried out using Klübersynth BEM 32-34). 1.5 Use in explosive areas The linear units are suitable for use in explosive atmospheres

Dateityp: application/pdf
Verlinkt bei:

its efficiency. 1.2 Regulation use The mechanical linear unit is intended for installation in machines, and is used solely for manipulating, positioning, transporting, palletising , loading, unloading [...] industrial environments. Any other use, or use for purposes beyond those stipulated, will be classed as illegitimate. The manufacturers accept no liability for any loss thereby incurred. The risk is borne [...] operation, refer to the following documents: • This operating manual for the linear unit, particularly the technical data • The operating manual for the line into which it is installed Decommissioning Dispose of

Dateityp: application/pdf
Verlinkt bei: