6.3 Mounting a drive unit 6.3.1 Mounting a motor 7 Start-up 8 Operation 9 Shutdown 10 Maintenance 10.1 Lubrication 10.2 Replacing the timing belt [...] ................................ 23 10 Maintenance ........................................................................................................... 24 10.1 Lubrication ..................... [...] standard carriage drive [mm] 140 220 260 260 260 400 Weight (without travel) [kg] 3.1 7.5 7.9 10.5 11.5 10.8 12,1 14 29 29 Weight (per 100 mm travel) [kg] 0.3 0.38 0.6 0.6 0.85 0.63 0,96 0,9 1,4 1,4 Weight

Dateityp: application/pdf
Verlinkt bei:

acceleration: Repeat accuracy: Idle torque: 0.40 Nm Moment of inertia: 3.00 ∙10-4 kgm² Drive element: Toothed belt 20 AT 5-E Stroke per revolution: Forces and moments ZRS Forces Dynamic [N] 700 300 600

Dateityp: application/pdf
Verlinkt bei:

acceleration: Repeat accuracy: Idle torque: 0.30 Nm Moment of inertia: 2.00 ∙10-4 kgm² Drive element: Toothed belt 16 AT 5- E Stroke per revolution: Forces and moments ZGS ZSS Forces Dynamic [N] 500 80

Dateityp: application/pdf
Verlinkt bei:

Automation GmbH In Laisen 74 72766 Reutlingen Telefon: +49 7121 14498-0 Telefax: +49 7121 14498-10 Kontakt: info[at]hsb-automation.de Registergericht Amtsgericht Stuttgart HRB 352688 Steuer-Nr. 78111 / 45604

Standard design Gamma ASS Linear Unit Unit size 220 Drive element Toothed belt 75AT10-E Moment of inertia [kgm²] 3.75 x 10-2 Stroke per revolution [mm] 320 Speed max. [m/s] 5 Max. acceleration [m/s2] 60 [...] ................................ 16 10 Maintenance ........................................................................................................... 17 10.1 Lubrication ..................... [...] M5 M6 M8 M10 M12 The figures given are intended as guides. For shorter insertion depths, the figures must be adjusted accordingly. DIN912/ISO4762-8.8 2,7 5,4 9,0 22,0 43,0 74,0 DIN912/ISO4762-10.9 3,0 5

Dateityp: application/pdf
Verlinkt bei:

90 120 160 220 280 Antriebselement Zahnriemen 32AT10 40AT10-E 50ATL10 75AT10 75ATS15 Trägheitsmoment [kgm²] 3,15 x 10-3 4,90 x 10-3 1,80 x 10-2 3,30 x 10-2 0,12 Hub pro Umdrehung [mm] 210 200 240 320 450 [...] 3 Antrieb anbauen 6.3.1 Motor anbauen 7 Inbetriebnahme 8 Betrieb 9 Außerbetriebnahme 10 Wartung 10.1 Schmierung 10.2 Zahnriemen auswechseln [...] ......................................... 10 6.1 Lineareinheit von unten verschrauben ..................................................................... 10 6.2 Maximalen Verfahrweg einstellen .....

Dateityp: application/pdf
Verlinkt bei:

changed: ao / 27/02/2024 Tightening torques [Nm] for fastening screws Fastening screws M4 M5 M6 M8 M10 The values specified are standard values. The values must be adapted accordingly for shorter screw-in [...] must be used and secured with Loctite 243. DIN912/ISO4762-8.8 2.7 5.4 9.0 22.0 43.0 DIN912/ISO4762-10.9 3.0 5.7 9.0 22.0 43.0 DIN912/ISO4762-12.9 3.0 5.7 9.0 22.0 43.0 Method Start with the assumption [...] parallel to the profile tube and tighten (observe tightening torques and lock). 2. Align the holder (3) at the intended location as centrally as possible to the screw connections and put the screws in loosely

Dateityp: application/pdf
Verlinkt bei:

90 120 160 220 280 Antriebselement Zahnriemen 16AT10 25ATL10 32AT10 40AT10 50ATL10 Trägheitsmoment [kgm²] 2,20 x 10-3 3,85 x 10-3 8,70 x 10-3 1,55 x 10-2 0,12 Hub pro Umdrehung [mm] 200 200 210 240 300 [...] 3 Antrieb anbauen 6.3.1 Motor anbauen 7 Inbetriebnahme 8 Betrieb 9 Außerbetriebnahme 10 Wartung 10.1 Schmierung 10.2 Zahnriemen auswechseln [...] ......................................... 10 6.1 Lineareinheit von unten verschrauben ..................................................................... 10 6.2 Maximalen Verfahrweg einstellen .....

Dateityp: application/pdf
Verlinkt bei:

Baugrößen 70 90 120 160 Antriebselement Zahnriemen 25AT5-E 32AT5-E 40AT10-E 50ATL10 Trägheitsmoment [kgm²] 6,70 x 10-4 2,10 x 10-3 7,50 x 10-3 1,23 x 10-2 Hub pro Umdrehung [mm] 125 175 200 240 Geschwindigkeit [...] 5 Antrieb anbauen 6.5.1 Motor anbauen 7 Inbetriebnahme 8 Betrieb 9 Außerbetriebnahme 10 Wartung 10.1 Schmierung 10.2 Zahnriemen auswechseln [...] ........................................... 10 6.1 Lineareinheit mit Befestigungsleisten montieren ...................................................... 10 6.2 Lineareinheit von unten verschrauben ..

Dateityp: application/pdf
Verlinkt bei:

................................ 22 10 Maintenance ........................................................................................................... 23 10.1 Lubrication ..................... [...] ................................. 23 10.2 Replacing the toothed belt ....................................................................................... 24 10.3 Replacing the cover band .......... [...] M5 M6 M8 M10 M12 The values specified are standard values. The values must be adapted accordingly for shorter screw-in depths. DIN912/ISO4762-8.8 2.7 5.4 9.0 22.0 43.0 74.0 DIN912/ISO4762-10.9 3.0 5.7

Dateityp: application/pdf
Verlinkt bei: