Seite B51 Stand: 08.04.2025 Bestellbezeichnung für Zahnriemenantrieb Bestellbeispiel: Beta 80-ZRS-32AT5-E-220-1000-1420-AK-AZ1-8RM4-1 Produktreihe Baugröße (Version*) Antrieb Z = Zahnriemenantrieb O = ohne

Dateityp: application/pdf
Verlinkt bei:

32 32 32 Spindle pitch [mm] 5 10 20 50 5 10 20 40 5 10 20 40 5 10 20 40 Moment of inertia [kgm²/m] 8,50 x 10-5 6,45 x 10-4 6,45 x 10-4 6,45 x 10-4 Max. velocity1) [m/s] 2,5 2 2 2 Max. acceleration [m/s2] [...] 90 12 5 3800 10 4300 Delta 110-C 16 5 12800 10 14300 20 8100 40 8500 Delta 145-C 20 5 14600 10 13500 20 11500 50 12300 Delta 200 32 5 26200 10 33100 20 30200 40 15200 Delta 240 Delta 240-C 32 5 26200 10 [...] 1500 3000 1500 Spindle diameter [mm] 12 12 16 16 Spindle pitch [mm] 5 10 3 5 10 20 40 4 Moment of inertia [kgm²/m] 1,20 x 10-5 3,25 x 10-5 Max. velocity1) [m/s] 0,25 2 Max. acceleration [m/s2] 20 20 No-load

Dateityp: application/pdf
Verlinkt bei:

Bestellbeispiel: Sigma 120-ZRS-40AT10-200-1000-1440-AZ1-6NS5-1 Produktreihe Baugröße Antrieb Z = Zahnriemenantrieb O = ohne Antrieb A = angetriebener Schlitten Führungssystem R = Rollenführung konstruktive

Dateityp: application/pdf
Verlinkt bei:

engagierter Fachbetrieb bieten wir Dir eine solide Ausbildung zum Industriemechaniker. Während der 3,5-jährigen Ausbildungszeit wirst Du in den Bereichen CNC-Fertigung und Montage arbeiten. Eine Lehrzei [...] Bewerbungsunterlagen an unseren Ausbilder, Herrn Michael Speidel, gerne auch per E-Mail: bewerbung[at]hsb-bewerbung.de Informationen findest Du auch im Ausbildungsatlas der IHK . Schülerpraktikum bei HSB [...] Bewerbungsunterlagen an unseren Ausbilder, Herrn Michael Speidel, gerne auch per E-Mail: bewerbung[at]hsb-bewerbung.de

Example: Beta 80-ZRS-32 AT5-E-220-1000-1420-AK-AZ1-8RM4-1 Product Size (version*) Drive Z = Toothed belt drive O = Without drive A = Powered carriage Guide system R = Roller guide S = Rail guide G = Sliding

Dateityp: application/pdf
Verlinkt bei:

Page TK2Release: 02.08.2017 Calculations Critical bending speed Critical bending speed is the speed at which the forces of rotational imbalance initiate resonant vibration of the spindle. The cause of this [...] III IV fkr = 0.356 fkr = 1 fkr = 1.56 fkr = 2.27 I IIIII IV lkr = 2 • l lkr = l lkr = 0.7 • l lkr = 0.5 • l Fax Fax Fax Fax

Dateityp: application/pdf
Verlinkt bei:

-15 °C / 5 °F -10 °C / 14 °F -10 °C / 14 °F Upper service temperature 120 °C / 248 °F 140 °C / 284 °F 140 °C / 284 °F Texture fibrous fibrous fibrous Colour space brown brown brown Density at 20 °C approx [...] be requested via our website www.klueber.com. You may also obtain them through your contact person at Klüber Lubrication. Pack sizes Klüberplex BE 31-102 Klüberplex BE 31-222 Klüberplex BE 31-502 Cartridge

Dateityp: application/pdf
Verlinkt bei:

Example: Sigma 120-ZRS-40 AT10-200-1000-1440-AZ1-6NS5-1 Product Size Drive Z = Toothed belt drive O = Without drive A = Powered carriage Guide system R = Roller guide Model ZRS = Standard (Horizontal)

Dateityp: application/pdf
Verlinkt bei:

process. Both spindles and nuts are finished to a gothic arch profile. The ball contact angle is 45° (±5°). Speeds The generally permitted speed limit is 3000 rpm. On request, for certain sizes and installation [...] fail prematurely. Accuracy HSB ball screw spindles are available in the following accuracy classes: T5 = Pitch accuracy 23 µm/300 mm T7 = Pitch accuracy 52 µm/300 mm Unless specified otherwise, we supply [...] °C are also permissible for brief periods. Ball screws are subject to certain restrictions when used at temperatures below freezing. In addition, the specifications provided by the lubricant supplier must

Dateityp: application/pdf
Verlinkt bei:

used and secured with Loctite 243. DIN912/ISO4762-8.8 2.7 5.4 9.0 22.0 43.0 DIN912/ISO4762-10.9 3.0 5.7 9.0 22.0 43.0 DIN912/ISO4762-12.9 3.0 5.7 9.0 22.0 43.0 Method Start with the assumption that the [...] clamped brake rod holder (5) in the centre of the screw-on threads and parallel to the profile tube and tighten (observe tightening torques and lock). 2. Align the holder (3) at the intended location as [...] 4. Apply pressure to brake/crash protection (2). 5. Move the profile or carriage (depending on the version) in the direction of the brake rod holder (5) as far as the end position. 6. Depressurise the

Dateityp: application/pdf
Verlinkt bei: