Technical data Linear unit type Sigma ZRSD Unit sizes 90 120 160 Drive element Toothed belt 16AT5-E 25ATL10 32AT10 Moment of inertia [kgm²] 1.70 x 10-3 4.92 x 10-3 7.16 x 10-2 Stroke per revolution [mm] 175 [...] The individual values must be reduced for a mixed load or the occurrence of several torques or forces at the same time. If in doubt, please contact Technical Support. Static and dynamic load ratings of the [...] accurate movement of loads from one position to another. It consists of a basic aluminium profile, (at least) one moveable carriage that is supported by a guide element (track roller guide), and a drive

Dateityp: application/pdf
Verlinkt bei:

These installation and maintenance instructions are part of the unit and must be kept readily available at all times for reference. The instructions must be passed on together with the unit to any third party [...] rooms (ISO 14644) The linear units used in clean rooms are fitted with a vent hole (generally G1/4“) at the basic profile. The following guidelines must be observed: • The linear unit must be subjected to [...] with a grease suitable for use in clean rooms (basic lubrication carried out using Klübersynth BEM 32-34). 1.5 Use in potentially explosive areas The linear units are not suitable for use in potentially

Dateityp: application/pdf
Verlinkt bei:

installed in our linear modules protect the unit at low speed (commissioning). They are definitely not intended to completely protect the unit against damage at high speed and/or with a large mass. Shutdown [...] of its guideway at any point, otherwise it will be damaged. 28. Clamp the press rollers in place. 29. Bolt on the stripper brushes. 30. Replace the bands indicating the safety zones at the right and left [...] driver and fix it at one end by the clamp fitting. 7. Carefully press the cover band into its guideway along its entire length until it audibly snaps into place. It must not stick out at any point, otherwise

Dateityp: application/pdf
Verlinkt bei:

installed in our linear modules protect the unit at low speed (commissioning). They are definitely not intended to completely protect the unit against damage at high speed and/or with a large mass. Shutdown [...] Warranty The warranty conditions are laid down in the terms and conditions of delivery and payment issued at time of order. Warranty cover will be voided if: • the unit is not operated in accordance with the [...] TSD BSD TSD Max. speed [rpm] 3000 1500 3000 1500 3000 1500 3000 1500 Spindle diameter [mm] 20 25 24 32 40 Spindle pitch [mm] 5 10 20 20 long 50 4 8 16 5 5 long 10 10 long 25 25 long 50 5 10 5 10 20 40 6

Dateityp: application/pdf
Verlinkt bei:

temperature [°C] 2 500 0,6 6 – 8 10 6 4 2500 1,4 6 – 8 10 6 6 6000 4,2 6 – 8 10 6 Compressed air VG-32 ISO 3448 filtered, oiled or not oiled -10 up to +60 * Minimum holding force when the brake is not [...] request). The ROBA®-linearstop is mainly maintenance-free. The brake rod must be checked regularly (at least every 6 months) for contamination by friction value-decreasing materials, and cleaned if necessary [...] condition of the brake or to prevent possible load crashes. Pressure source (6 - 10 bar) Maintenance unit 3/2-directional control valve Quick-action ventilating valve Non-return valve (against pressure fluctuations)

Dateityp: application/pdf
Verlinkt bei:

An independent and neutral point of contact/complaints office is available at all times for all of the above-mentioned groups at beschwerdestelle@hsb-automation.de. We are guided by the United Nations ‘Protect [...] with the criteria contained therein at all times. 5.6 Freedom of association We understand freedom of association to mean the right to assemble and associate peacefully at all levels, including in particular [...] undertaking This Code of Conduct (“CoC”) applies to all business units and locations of our organisation at all levels and to all stakeholders such as employees, customers, suppliers and owners, as well as our

Dateityp: application/pdf
Verlinkt bei:

installed in our linear modules protect the unit at low speed (commissioning). They are definitely not intended to completely protect the unit against damage at high speed and/or with a large mass. Shutdown [...] plastic cover band and secure it with the clamping plate at the other end. b. Steel cover band Secure the steel cover band with the clamping plate at the other end, make sure there is no tension on the band [...] plastic cover band and secure it with the clamping plate at the other end. b. Steel cover band Secure the steel cover band with the clamping plate at the other end, make sure there is no tension on the band

Dateityp: application/pdf
Verlinkt bei:

installed in our linear modules protect the unit at low speed (commissioning). They are definitely not intended to completely protect the unit against damage at high speed and/or with a large mass. Shutdown [...] driver and fix it at one end by the clamp fitting. 7. Carefully press the cover band into its guideway along its entire length until it audibly snaps into place. It must not stick out at any point, otherwise [...] rooms (ISO 14644) The linear units used in clean rooms are fitted with a vent hole (generally G1/4“) at the basic profile. The following guidelines must be observed: • The linear unit must be subjected to

Dateityp: application/pdf
Verlinkt bei:

These assembly and maintenance instructions are part of the unit and must be kept readily available at all times for reference. The instructions must be passed on together with the unit to any third party [...] must be lubricated with grease approved for clean room use (initial lubrication with Klübersynth BEM 32-34). 1.5 Use in potentially explosive areas The linear units are suitable for use in explosive atmospheres [...] accurate movement of loads from one position to another. It consists of a basic aluminium profile, (at least) two moveable carriages that are supported by a guide element (track roller guide), and a drive

Dateityp: application/pdf
Verlinkt bei:

These assembly and maintenance instructions are part of the unit and must be kept readily available at all times for reference. The instructions must be passed on together with the unit to any third party [...] must be lubricated with grease approved for clean room use (initial lubrication with Klübersynth BEM 32-34). 1.5 Use in potentially explosive areas The linear units are suitable for use in explosive atmospheres [...] accurate movement of loads from one position to another. It consists of a basic aluminium profile, (at least) two moveable carriages that are supported by a guide element (track roller guide), and a drive

Dateityp: application/pdf
Verlinkt bei: